CAMEC 2022

Conveyor Belts

Articles Buyers Guide

Construction and demolition waste: from downcycling towards closed- and open-loop recycling

  • 18 May 2022

The construction industry generates paramount quantities of waste. While recycling rates of construction and demolition waste (CDW) vary around the world, in all regions most of the material recovered is downcycled into low-quality materials or sent to landfill. 


Sogliano Ambiente Spa spreads its business wings to the End-of-Waste recovery of WEEE scrap

  • 26 April 2022

Sogliano Ambiente has recently opened new premises to collect and recycle non-hazardous electrical and electronic waste, choosing to use Panizzolo Recycling Systems’ technologies to treat also household WEEE in the End-of-Waste process.


STADLER and KRONES close the circular economy loop at the Kunststoff Recycling Grünstadt plant in Germany

  • 22 April 2022

STADLER and KRONES have collaborated in the design and installation of a new sorting and washing plant for Kunststoff Recycling Grünstadt GmbH (KRG), a German recycling company serving the plastics processing industry. 


Automatic waste sorting plant in Tolentino

  • 19 April 2022

Following the award of the contract announced by COSMARI, PAL is finalising the   turn-key project to develop a new plant at the Tolentino site for the sorting of  paper/cardboard and light multi-material fractions of urban waste of the province of Macerata.


ENVIE applies FOR REC technology to combine efficiency and sustainability

  • 13 April 2022

A 100% sustainable result: the French company ENVIE relies on FOR REC equipment to recover valuable materials contained in WEEE and creates a “recycling line” focused on employee safety.


Ecomondo, missione 2022: guidare la transizione ecologica

  • 11 April 2022

Alla fiera di Rimini di IEG dall’8 all’11 novembre in contemporanea a Key Energy.


Pellenc ST ha fornito 7 selettori Mistral per l’impianto Iren di Parma

  • 11 April 2022

Nell’impianto Recap, il più grande d’Italia per volumi di carta, plastica, lavorano sette selezionatrici ottiche Mistral Compact 2800 DVI.

MB Benne Selezionatrici 2022

Torna ECOMED - PROGETTOCOMFORT: idrogeno, ciclo virtuoso dei rifiuti ed economia circolare i focus di quest’anno

  • 6 April 2022

Dal 6 all’8 aprile 2022 presso Le Ciminiere di Catania torna la Green Expo del Mediterraneo targata Amazing Events.


ReCaP, l’impianto hi-tech più grande d’Italia per volumi di carta, plastica e barattolame

  • 6 April 2022

Iren inaugura ReCaP, il nuovo impianto all’interno del Polo Ambientale Integrato di Parma (PAI) per la selezione di imballaggi leggeri fornito da Stadler.


Ecotec Solution sarà a Ecomed 2022 a Catania dal 6 all’8 Aprile

  • 30 March 2022

Iniziano gli eventi fieristici e come primo appuntamento dell’anno Ecotec Solution sarà al Centro Fieristico 'Le Ciminiere' di Catania e accoglierà i clienti presso il proprio stand 37 al Pad. F1 piano terra.


STADLER designs and installs state-of-the-art light packaging sorting plant in Eitting, Germany for PreZero Recycling

  • 24 March 2022

Environmental services provider PreZero is driven by the ultimate goal of reducing the consumption of natural resources in a world where they are no longer wasted through closed loops – aiming for 100 percent reusable material.


Inaugurato l’impianto per la produzione di biometano di Legnano

  • 17 March 2022

A Legnano, in provincia di Milano, il nuovo impianto per la produzione di biometano e compost di qualità dalla digestione anaerobica della Frazione Organica del Rifiuto Solido Urbano (FORSU) della raccolta differenziata.


A simple question of quality

  • 7 March 2022

The waste management company Westarp has opted for a powerful processing line for handling refuse-derived fuels in different qualities, with both medium-calorific and high-calorific fractions. Vecoplan provided a one-stop solution, from project planning to installation to commissioning. The system, which is characterised by high output quality and profitability, is robust from end to end. Its high-performance pre-shredders and re-shredders are insusceptible to extraneous material. The level of availability is high and energy consumption is low.


TOMRA Recycling Italia: nuova struttura del personale per nuovi traguardi

  • 23 February 2022

Dopo l’inaugurazione del test center per la selezione di flakes del settembre scorso, la sede italiana di TOMRA Recycling ha ora un nuovo responsabile commerciale e una nuova squadra.


IFAT Munich in May: driving environmental and climate protection

  • 2 February 2022

More than 2,500 exhibitors from 50 countries registered so far. All exhibition halls and the outdoor area occupied.


Film and flexible packaging recycling: closing the circular economy loop

  • 24 January 2022

Film and flexible packaging are excellent products from a performance point of view, which accounts for their stubbornly extensive use, but they present a difficult end-of-life issue. The solution lies in the creation of a circular economy where these materials are returned to the production cycle. However, recycling these materials requires a specific approach because of their characteristics.  STADLER, a leading supplier of sorting plants for the recycling industry, has seen a sharp increase in the demand for sorting and recycling facilities capable of closing this loop.


Sono firmati STADLER i nuovi impianti di selezione di GAIA e IREN a Asti e Parma

  • 3 December 2021

Con gli obiettivi dell’agenda 2030 sempre più vicini, le società per i servizi ambientali inseriscono sempre più spesso nei propri piani industriali investimenti in impianti di riciclo in grado di avvicinarci sempre di più al target zero waste, trasformando i rifiuti in materie prime seconde, in grado di essere reimmesse in commercio, con scarti ridotti al minimo.


STADLER and Reclay Subsidiary RecycleMe announce cooperation on practical recyclability

  • 23 November 2021

The two partners join forces in the first cooperation of its kind, where recyclability consulting and sorting plant construction come together.